While Windows 8 and 10 can perform this troubleshooting step automatically when the PC restarts after Blue Screens. However, it will be a better idea to visit the Action Center to see if there are more details or additional troubleshooting steps. BSODs are generally caused by problems with computer hardware.
Install a good antivirus and malware scanner and scan your PC for viruses which may be causing a blue screen due to data corruption. Make sure that the Antivirus is up-to-date with the latest virus definitions.
If this stops your PC blue-screening, you’ll know the issue was caused by software. A buggy or incorrectly installed driver can cause your computer to crash. Head to the manufacturer of your computer hardware component’s website and download and install the most up-to-date driver. If your PC’s operating system crashes, there is a chance of data loss as programs won’t have the opportunity to save and shutdown properly. However, when a BSOD occurs, Windows automatically creates a ‘minidump’ file that saves information about the crash to your disk.
Leaders in Hard Drive Data Recovery Software & Services. Running too many programs together in the backstage can also cause blue screen of death. The computer can hardly handle so many programs at the same time, then crash. This problem can be fixed by rebooting your computer system and optimize it in a way.
Users Reported The Issue Online
Also, sometimes it can occur because of issues with low-level software running in the Windows kernel. The UPS may instruct your PC to enter its Shutdown state, or go into Hibernation.
You can use the information to determine the cause of the BSOD and prevent it from happening again in the future. The top 20 ways that can fix a Blue Screen of Death are listed here, you’ll find complete directions for each item at the article. If you are, it probably wouldn’t hurt to uninstall them and try again. The drivers you need will depend on your graphics card, of course. Windows 10 will be able to tell you what you have in your system, but it’s likely to be onboard Intel graphics or something from Nvidia or AMD.
- If you find an unsupported device, try contacting the device’s manufacturer to see if they offer a Windows 2000 driver.
- Check with your hardware vendor for any BIOS updates.
- Try removing any new hardware or software to see if the problem goes away.
- If it does, check to see if that hardware or software was intended for Windows 2000.
Just remove secondary and external drives to see if your computer will boot without them. You can also try using a boot disk to start your computer and then run chkdsk /f /r to repair. If you are still troubling to locate good advice for solving the issue, don’t worry. We do have some additional tips that might help you deal with many BSODs.
The better solution is to clean up the ash inside in order to speed up your system. For graphics driver failure, you need to boot into safe mode first, completely delete the newly-added graphics driver in control panel and reboot your system. Then you can install a proper graphics driver on the official website best site or through Driver Booster . Pay attention to your system information can avoid such drive failure. Blue Screen of Death, generally known as BSOD, is a computer failure where problems have been detected by the system and it has disabled itself to prevent potential threats.
Other Hardware Problems
Some blue screen problems can be fixed by simply rebooting the system, while others may need to take further steps. If you are not able to access your Windows and it’s desktop, then after several system reboots Windows will automatically start its so called Repair mode. Once you are on Automatic Repair screen, select "Troubleshoot". Windows Update service enables the detection, download, and installation of updates for Windows and other programs.
Background Intelligent Transfer service transfers files in the background using idle network bandwidth. If you cannot delete the contents of SoftwareDistribution folder, then try to stop these two services by executing a couple of commands in Command Prompt. If you can’t start your Windows normally, then start your Windows in Safe Mode (with Networking). You can find the link to article about how to boot your Windows in Safe Mode in the introduction section. Blue Screens often occur when a corrupt disk is attached to your system.